1️⃣ Product Introduction
Sand Stabilizer is a water-based high-polymer emulsion designed to strengthen and stabilize sand, concrete, walls, and floor surfaces affected by sand loss, dusting, alkalization, and mold.
The product penetrates deeply into the substrate, forming a strong internal bond that prevents sand shedding and surface peeling, while improving durability for subsequent finishes such as painting, putty application, or tile installation.
2️⃣ Technical Specifications
Product Name: SAND STABILIZER
Product Type: Water-based high-polymer emulsion
Volume: 500 ml
Application Methods: Spray, brush, or roller
Dilution: Ready to use, no dilution required
Coverage: Approximately 3–5 m² per kg (depending on surface condition)
Main Functions:
Sand fixation and dust control
Concrete surface stabilization
Alkali treatment
Mold and moisture resistance
Improved surface adhesion
3️⃣ Instructions for Use
Clean the surface thoroughly, removing loose sand, dust, and contaminants.
Apply SAND STABILIZER directly using a sprayer, brush, or roller.
Apply generously to areas with sand loss or dusting.
Allow the surface to dry completely before proceeding with further finishing work.
3️⃣ Instructions for Use
Store in a cool, dry, and well-ventilated place.
Avoid direct sunlight and high temperatures.
Keep the container tightly sealed after use.
Keep out of reach of children.